產品規格 / PC-Camera Controller > VGA
PAP7501V 附件下載: Datasheet   Back
  General Description
    The PAP7501V High-Speed USB2.0 Camera Controller is a highly integrated and cost-effective solution for USB2.0 PC-Camera based applications. It is fully compliant with USB Video Class 1.1 and USB audio class 1.0 standard. The PAP7501V integrates a 8-bit micro-controller, a image signal processing(ISP) engine, a MJPEG encoder, and a 24K-byte programmable SRAM.
  Part No. : PAP7501V
  PC Interface : USB2.0 with UVC1.1
  Resolution : 640(H) x 480(V) (max)
  Output Format : MJPEG / YUV2
  Frame Rate : 30 frames/sec (max)
  Sensor Input Format : Support 8-bit raw data / YUV2
  Image Processing : Built-in ISP and MJPEG encoder
  MCU : Built-in 8-bit MCU
  Firmware : Built-in 40KB Mask-Rom and 24KB SRAM
  User Settings : Support external serial EEPROM/Flash
  Audio Recording : Built-in 10-bit Auido ADC with 16/48KHz sampling rate
  Clock : Need an external 12MHz clock
  Supply Voltage : 5V (USB bus power)
  Package : 48-pin QFN
  Application  : PC camera 
 
PAP7601QN 附件下載:   Back
  General Description
    The PAP7601 High-Speed USB2.0 Camera Controller is a highly integrated and cost-effective solution for USB2.0 PC-Camera based applications. The PAP7601 is fully compliant with USB Video Class 1.1. The PAP7601 integrates a microcontroller, a image signal processing (ISP) engine, a MJPEG encoder, and 12K-byte programmable SRAM.
  Part No. : PAP7601QN
  PC Interface : USB2.0 with UVC1.1
  Resolution : 640(H) x 480(V) (max)
  Output Format : MJPEG / YUV2
  Frame Rate : 30 frames/sec (max)
  Sensor Input Format : 8-bit raw data / YUV2
  Image Processing : Built-in ISP and MJPEG encoder
  MCU : Built-in 8-bit MCU
  Firmware : Built-in 32KB Mask-Rom and 12KB SRAM
  User Settings : Support external serial EEPROM/Flash
  Audio Recording : NA
  Clock : Need an external 12MHz clock
  Supply Voltage : 5V(USB bus power) / 3.3V
  Package : 48-pin QFN
  Application  : PC camera 
 
 
Copyright © PixArt Imaging Inc. All rights reserved.