 |
|
| |
 |
General Description |
| |
|
The ADNS-3080 is a high performance addition to PixArt
Imaging popular ADNS family of optical mouse sensors.
The ADNS-3080 is based on a new, faster architecture with
improved navigation. The sensor is capable of sensing high
speed mouse motion - up to 40 inches per second and
acceleration up to 15g – for increased user precision and
smoothness.
The ADNS-3080 along with the ADNS-2120-001 trim lens,
ADNS-2220-001 assembly clip and HLMP-EG3E-xxxxx led
form a complete, compact optical mouse tracking system.
There are no moving parts, which means high reliability and
less maintenance for the end user. In addition, precision
optical alignment is not required, facilitating high volume
assembly.
The sensor is programmed via registers through a four-wire
serial port. It is packaged in a 20-pin staggered dual inline
package (DIP). |
 |
| |
|
Operating Voltage : 3.3V |
| |
|
Interface : 4-Wire SPI |
| |
|
IC Package : 20-DIP |
| |
|
Resolution : 1600cpi |
| |
|
Speed : 40ips |
| |
|
Acceleration : 15g |
| |
|
Illumination : Red LED |
| |
|
Dimension (mm) : 22.3mm x 12.85mm x 5.43mm |
| |
|
Run Mode Current : 52mA |
| |
|
IO Voltage : 3.3V |
| |
|
Lens Part Number : ADNS-2120-001 |
| |
|
Sample Kit Part Number : ADNK-3080 |
| |
|
Reference Design Kit Part Number : ADNK-3083 |
| |
|
Application
:
Optical Mouse |
 |
| |
|
PixArt is committed to achieve the customer Quality & Reliability service expectation.
Continuously improving our products to satisfy our customer requirement.
Deliver world class qualification and methodology service.
|
|
|
| |
|
General Description |
| |
|
The ADNS-9800 Laser gaming sensor comprises of sensor and VCSEL in a single chip-on-board (COB) package. ADNS-9800 provides enhanced features like programmable frame rate, programmable resolution, configurable
sleep and wake up time to suit various PC gamers’ preferences.
The advanced class of VCSEL was engineered by PixArt Imaging to provide a laser diode with a single longitudinal and a single transverse mode.
This Laser gaming sensor is in 16-pin integratedchip-on-board (COB) package. It is designed to be used with ADNS-6190-002 small form factor (SFF) gaming laser lens to achieve the optimum performance featured in this
document. These parts provide a complete and compact navigation system without moving part and laser calibration process is NOT required in the complete mouse form, thus facilitating high volume assembly. |
|
| |
|
Operating Voltage : 3V / 5V |
| |
|
Interface : 4-Wire SPI |
| |
|
IC Package : COB |
| |
|
Resolution : 8200cpi |
| |
|
Speed : 150ips |
| |
|
Acceleration : 30g |
| |
|
Illumination : LASER |
| |
|
Dimension (mm) : 14.4mm x 15.6mm x 6.95 mm |
| |
|
Run Mode Current : 18mA (typ. low) |
| |
|
Rest 1 Mode Current : 0.26 mA |
| |
|
Rest 2 Mode Current : 0.12 mA |
| |
|
Rest 3 Mode Current : 0.08 mA |
| |
|
IO Voltage : 1.65 - 3.3V |
| |
|
Lens Part Number : ADNS-6190-002 |
| |
|
Sample Kit Part Number : ADNK-9800 |
| |
|
Reference Design Kit Part Number : ADNK-9803-SL11 |
| |
|
Application
:
Optical Mouse |
|
| |
|
PixArt is committed to achieve the customer Quality & Reliability service expectation.
Continuously improving our products to satisfy our customer requirement.
Deliver world class qualification and methodology service.
|
